EASTEC 2009 was held at Eastern States Exposition Grounds, Western Springfield, MA USA May 19-21, 2009. In attendance for OneCNC was Michael (OneCNC USA) Ward (WMS USA) Kanasha (OneCNC USA) promoting the OneCNCXR3 range of products.

Manufacturers were invited to come by and see the much talked about OneCNCXR3 HS machining efficiency tool paths. OneCNC is now in the second year of producing this new time saving technique in CNC machining and manufacturers are pleased to have the ability to utilize the entire flute length of the cutting tool saving both time and money.

OneCNC HS tool path technology is included in all OneCNCXR3 milling products at no extra cost.

EASTEC 2009 provided another opportunity for OneCNC Showcase CNC manufacturing efficiency at minimum cost to assist manufacturers.

Marvo Technologies B.V. is a specialised metal-turning company in the city of Tilburg, in the Netherlands. Typical batch quantities can extend to 10,000 to 15,000 or more workpieces from a range on materials from aluminium to hardened steel.

On completion of an investigation of many CAD-CAM systems in 2008, Marvo ordered the highest level OneCNC Lathe system, CYB and implemented it in January 2009. A wide range of machine configurations made the choice of a CAD-CAM system a little difficult. With OneCNC Marvo are now making reliably, efficient programs for all their machines, and new orders have been undertaken which would have been previously impossible to produce.

‘We looked at other systems, some costing 2-3 times the cost of OneCNC, but in the important aspects of how we work, they did not offer more than OneCNC …..and quite often very much less. OneCNC is working above our expectations, we are very pleased.’

Seen in this video is the Gildemeister 42T Linear running a test part in aluminium.

Marvo Technologies B.V.
Minosstraat 10
5048 CK Tilburg
Netherlands
Phone: +31 13 5729610
Fax +31 13 5729620

Link to Marvo website: http://www.marvo.nl

Haas Factory Outlet of Lafayette, LA USA held a OneCNC High Speed Toolpath Workshop May 13th, 2009.

The theme of the day provided live Haas machine and OneCNC CAD-CAM demonstrations of High Speed Toolpath roughing acknowledged as roughing technology at its best. This highly efficient method of metal removal minimizes cycle time by allowing the tool to run at a maximum cut depth. These live toolpath demonstrations showed that it ensures that there are no full engagement cuts therefore guaranteeing a constant tool load. HS rough provides very efficient machining allowing higher machining speeds resulting in savings of up to 40% or more machining time.

Multiple sessions of the demonstration were held between 9:00am – 5:00pm. Haas Factory outlet experts were on hand with OneCNC answer the technical questions first hand.

Here we see Michael (OneCNC second from right) explaining the finer details of OneCNC.

This is another example of OneCNC in partnership with Haas Factory Outlets providing the expertise and real examples of how to gain the maximum efficiency in the CNC shop.

Haas Factory Outlet
A Division of Machine Tools, Inc.
914 W. Pont Des Mouton Rd., Lafayette, LA USA 70507
P.O. Box 60249, Lafayette, LA 70596-0249
PH: (337) 234-0818 (800) 448-2084
Fax: (337) 234-1245
E-MAIL 
Web: www.machinetoolscnc.com