OneCNCXR3 5 axis machining exhibition in Japan

Sun Engineering Machine Co, Ltd from Matsumoto City, Nagano Prefecture, is a comprehensive machine tool company in Japan.

On 21st and 22nd May 2009 an advanced machining in house exhibition was held using OneCNCXR3 tool paths with a Mitsui Seiki Vertex550-5X 5-axis machining center performing cutting demos.

Here is a video of the exhibition.

Here is a picture of the part and note the engraving and mirror effect.

5ax

Molnar Machine keeps pace with technology

Molnar machine, founded in 1995 out of Lynnville, TN by Jeff Molnar, specializes in inspection gages, assembly jigs and fixtures, as well as a wide variety of close tolerance partmaking.

I have been in the machining and manufacturing environment since 1978, and have seen the increasing need to stay attuned to the changes that have taken place over 30 years.  When I started my machine shop in 1995, there was no question that CNC machines were needed to stay competitive. With this type of technology, I was able to keep 3 or more machines running at the same time with only myself working. This is truly a “HIGH” for most machinists. CNC machines are a must for industry today, and just as important or perhaps even more important is owning the correct CAM software. One that allows importing of customer’s files without in glitches.

OneCNC has given me what I need to work with my customer’s drawings without any hiccups. We have Haas Lathes and Mills, and Hurcos and Prototracks, and we have the standard manual equipment and surface grinders and tooling. We work for a little bit of everybody, pretty generic. We work for the auto industry a little bit, different companies that make specialty one off parts like lights. We make dies for different companies, part holding jigs and fixtures, we components for specialty machine builders. I'm not at liberty to mention the company's names, but electronic companies, some computer companies we've made parts for, jigs and fixtures for them to hold parts and do welding. We're a pretty all around universal job shop.

Molnar_1

Caption: An automated camera system. The bodies will have and integral gear system that drives wheels on the outside and will go through most anything. There will be an extend-able camera system on the front that can take videos or still shots of underground pipe systems, caves, etc. They may be looking for underground fires, dead people (or alive – hopefully), and various blockages in underground piping or sewer systems.

I taught at a technology school and was able to use a popular CAM in my instructing. While I had become quite familiar with using the product, I found to teach it was quite a task. I also new there were expensive maintenance fees with this software, along with some of the other CAM suppliers, that I just could not afford when opening my shop. All in all, I am very happy that I chose OneCNC and with their no maintenance costs required, it is an awesome deal.

Molnar_2

I had a job requiring multiple 3D surfaces. After struggling for a couple of days and not being able to get it done with the leading CAM software that I was using, I contacted OneCNC. I told them if they could help me with this part efficiently and in a respectful amount of time, that I would purchase OneCNC.

Within an hour, via video conferencing, I was not only shown how to do it, but was given the post in order to make the part. It worked so well, that I purchased OneCNC immediately as promised. The down time really it wasn’t that bad. Within a couple of days I could do most or all 2D work. The 3D work also came within a week or so. As with any software, the more that you use it, the better that you become. OneCNC has yet to let me down! I have dealt with some very extensive drawings made in Solid Works and have yet to be unable to open and work with what I need.

OneCNC listens! Machinist’s who make recommendations regarding the improvement of this cam software are heard and it shows with the ever improving software. It continually gets better without the yearly maintenance fees.

Molnar Machine
556 Mount Olive Cemetery Road
Lynnville, TN 38472 USA
Phone: 931-424-8841

Web: Molnar Machine

AMRC Sheffield UK "Manufacturing Efficiency" Open Day

Amrc_1

Once again OneCNC UK participated in the "Manufacturing Efficiency" open day at the invitation of Haas Automation on Thursday 21st May 2009 at the AMRC Sheffield, UK.

The Advanced Manufacturing Research Centre with Boeing, is located at The Advanced Manufacturing Park, Wallis Way, Catcliffe, Rotherham, S60 5TZ , UK.

Amrc_3

It is a collaboration between world-leaders in the aerospace supply chain, key government offices and international academic institutions supporting the growth and success of high performance engineering and manufacturing companies and individuals throughout the region.

This is a great venue and the perfect opportunity for OneCNC UK to showcase OneCNCXR3 and in particular the High Speed machining real-time on a Haas machine to invited guests.

Amrc_2 

Above we see Peter, OneCNC UK Technical Director (Right) demonstrating OneCNCXR3 to the invited guests.

The theme of the day was a focus on increasing your productivity with live cutting demonstrations on the latest American CNC Technology.

Visit the AMRC website and view their amazing facilities.

www.AMRC.co.uk