OneCNC Powerful CAD CAM, made easy

Often designers and manufacturers have the opinion that 5 axis machining is both difficult and challenging.

OneCNC has continually developed 5 axis machining to be made easy.
OneCNC 5-axis machining can provide infinite possibilities as to the part sizes and shapes you can effectively machine. 
The term “5-axis” refers to the number of directions in which the cutting tool can move. 
On a 5-axis machining centre, the cutting tool moves across the X, Y and Z linear axes.
Machines with simultaneous ability also rotate simultaneously on the A and B axes to approach the part from all directions.
This means, you can process five sides of a part in a single setup.

OneCNC simultaneous 5-axis technology raises the limits on the types of part geometries you can machine. 
By empowering you to produce highly complex components in a single setup, OneCNC 5-axis technology can redefine your overall capabilities.

OneCNC CAD CAM software makes it possible for programmers to generate 5-axis NC programs quickly and easily, with short machining times and high quality surface finish.
This example shows both optimised Active Cut Step Reduction Technology combined with 5 axis Simultaneous Swarf and Area machining to machine this part.

OneCNC Research and Development team continues to develop 5 axis machining tool paths.
As part of this development process part examples are machined by our engineers in the process.

This is another part of the process used in testing and proving the practical results by actually machining components using Active Cut step reduction and Swarf machining.

For further details on OneCNC CAD/CAM products contact your local OneCNC Office >>

OneCNC Contact Us >>